A Garage Door with Modern Flair
Flexible Construction
Available in 1, 2, or 3-layer options, so you can pick the right balance of durability and insulation for your home.
Premium Materials
Built with tough steel panels and your choice of insulation for lasting strength and a quiet, solid feel every time you open the door.
Sleek Custom Finishes
Personalize your look with flush or grooved panels, dozens of paint colors, and rich Ultra-Grain® or Ultra-Grain Plank wood-look finishes. Go bold with Lustra™ matte for a true modern look.
Window Options
Add a touch of light your way—choose from short, long, or slim contemporary windows, stacked vertically or arranged just how you like.
Superior Insulation
Insulation choices include energy-efficient Intellicore® polyurethane or polystyrene, with R-values up to 18.4 for comfort and savings in any climate.
Weather-Ready
WindCode® reinforcement is available for homes in high-wind areas, giving you extra peace of mind.
Environmental Assurance
Clopay doors are compliant with environmental laws and regulations. Clopay doors do not contain HFCs. All Clopay doors are compliant with:
- California SB 1013
- Washington HB 1112 – Hydrofluorocarbon Greenhouse Gas Emissions
- Canadian regulations amending the ozone-depleting substances and halocarbon alternatives regulations
- New Jersey A-5583/S-3919 – Greenhouse Gas Bill
Flush Panel
Grooved Panel*
Flush With Long Windows*
Grooved with Short Windows*
Flush with full view short panel windows*
Flush panel with short windows*
Grooved with Long Panel Windows*
Full view with short panel windows*
Flush with Contemporary Slim Windows
decorative insert series windows
Colonial 509
Charleston 508
Stockton 612
Sunset 601
Charleston 608
Madison 611
Prairie 510
Madison ARCH613
Prairie 610
Sunset 501
Sunset 503
Sunset 603
Plain Short
Plain Long
double top sections
ARCH3 Plain
ARCH3 With Grilles
ARCH3 With Vertical Grilles
architectural series windows
Plain Short
Plain Long
ARCH1 Plain
ARCH2 Plain
architectural series windows
Short With Rectangular Grilles
Short With Squares Grilles
Long With Rectangular Grilles
Long With Square Grilles
ARCH1 With Vertical Grilles
ARCH1 With Grilles
ARCH2 With Grilles
ARCH2 With Vertical Grilles
Wrought Iron Short*
Wrought Iron Long*
Wrought Iron Arch*
contemporary slim windows
Contemporary Slim In Silver***
Contemporary Slim In Black***
Array
Clear
Rain*
Frosted
Obscure
Narrow Reed*
Midnight Gray
Premium Colors
Black*
Iron Ore*
Ultra-Grain Cypress Medium Finish*
Ultra-Grain Cypress Cherry Finish*
Ultra-Grain Cypress Walnut Finish*
Ultra-Grain Cypress Slate Finish*
Lustra Black*u00b1
Lustra Charcoal*u00b1
Lustra Silver*u00b1
Ultra-Grain Plank Kona*
Ultra-Grain Plank Coastal Gray*
Ultra-Grain Plank Espresso*
Ultra-Grain Plank Barnwood*
Ultra-Grain Plank Natural*
Ultra-Grain Plank Cedar*
Standard Colors
Standard White
Almond
Sandtone
Bronze*
Chocolate
Mocha Brown*
Hunter Green*
Charcoal*
Desert Tan
Modern Steel™ garage doors come in a wide palette of colors and finishes. Classic choices like Standard White, Almond, Sandtone, Chocolate, and Desert Tan work beautifully with almost any exterior. For a more distinctive look, try deeper hues like Bronze, Mocha Brown, Hunter Green, or Charcoal.
There are also premium finishes like Black and Iron Ore that can bring a vivid contrast to any exterior. For something really different, try one of the Lustra™ matte options (Black, Charcoal, Silver) for an unexpected, textured look. If you love the warmth of wood but want easy maintenance, Ultra-Grain® and Ultra-Grain Plank finishes offer the authentic look of cypress, walnut, cherry, barnwood, cedar, and more, each with realistic grain detail.
With so many standard and premium options—including custom Color Blast® shades by request—you won’t have any trouble finding the right color for your Modern Steel™ garage door.
*Available on select models.
± Matte paint finish has a subtle texture.
**Promotion valid on new door purchases in the Iron Ore color; savings vary by door size and location.
Installation Manual for Residential Sectional Insulated Steel Doors
Read InstructionsResidential Sectional 1-Layer And 2-Layer Doors
Read InstructionsSteel Garage Doors Care and Maintenance
Read InstructionsInstallation Warranty
Read InstructionsHow It’s Made: Modern Steel™
Every Modern Steel™ garage door is engineered to deliver years of performance with minimal maintenance. The door’s multi-layer steel construction comes in your choice of 1, 2, or 3-layer builds, so you can find the right fit for your needs and budget. Choose from Intellicore® polyurethane or classic polystyrene insulation. Both options boost energy efficiency, make the door feel sturdy and solid, and help keep your garage quieter.
Durability is built right in. The steel panels are protected by a multi-layer rust-prevention system: hot-dipped galvanizing, metal oxide pretreatment, and a baked-on primer and topcoat all work together to keep the door looking great, year after year. A replaceable vinyl bottom seal in a rust-resistant aluminum retainer blocks out drafts and water, while Clopay’s patented Safe-T-Bracket® adds peace of mind with a unique safety design.
Standard features like heavy-duty 14-gauge steel hinges, smooth 10-ball nylon rollers, and removable window grilles make maintenance easy and performance reliable. Modern Steel™ doors also meet strict air infiltration standards, so you get comfort and efficiency without compromise.
- Steel
- Intellicore® Polyurethane or Polystyrene Insulation
- Steel
| Model | Section Thickness | Panel Design | Ext. Steel Gauge | Backer | R-value* | Max Width** | Max Height |
| 520 | 2″ | Ribbed Steel | 20 Gauge | N/A | N/A | 26’2″ | 20’0″ |
| 520S | 2″ | Minor & Deep Ribs | 20 Gauge | Pre-painted 30 gauge steel back cover | 6.6 | 26’2″ | 20’0″ |
| 522 | 2″ | Flush | 20 Gauge | N/A | N/A | 24’2″ | 24’0″ |
| 522S | 2″ | Flush | 20 Gauge | Pre-painted 30 gauge steel back cover | 6.6** | 24’2″ | 24’0″ |
| 524 | 2″ | Ribbed Steel | 24 Gauge | N/A | N/A | 24’2″ | 20’0″ |
| 524V | 2″ | Minor & Deep Ribs | 24 Gauge | Polyethylene vinyl back cover | 6.6 | 26’2″ | 20’0″ |
| 524S | 2″ | Minor & Deep Ribs | 24 Gauge | Pre-painted 30 gauge steel back cover | 6.6 | 24’2″ | 20’0″ |
| 525 | 2″ | Ribbed Steel | 25 Gauge | N/A | N/A | 20’2″ | 16’0″ |
| 525V | 2″ | Minor & Deep Ribs | 25 Gauge | Polyethylene vinyl back cover | 6.6 | 20’2″ | 16’0″ |
| 525S | 2″ | Minor & Deep Ribs | 25 Gauge | Pre-painted 25 gauge steel back cover | 6.6 | 20’2″ | 16’0″ |
| 664 | 2 1/8″ | Raised Panel Steel | 24 Gauge | N/A | N/A | 20’2″ | 16’0″ |
| 664V | 2 1/8″ | Raised Panel | 24 Gauge | Polyethylene vinyl back cover | 6.3 | 20’2″ | 16’0″ |
*Calculated door section R-value is in accordance with DASMA TDS-163
Insulated and Non-insulated doors come with a variety of options to address your building requirements. Options below are not available on all models. See model specific literature or consult a Clopay commercial dealer for option availability.
DESIGN OPTIONS:
- Windows
- 24″x6″
- 24″x12″
- Full View (pre-painted white or brown or clear anodized)
- Black frame Window with Rounded Corners
COLORS:
- White – All Models
- Brown – All Models
- Tan – 524, 524S, 524V
- Gray – 524, 524S, 524V
- Trinar White – 524, 524V, 525S
- Desert Tan – 664, 664V
- Sandtone – 664, 664V
- Almond – 664, 664V
PERFORMANCE OPTIONS:
- High Cycle Springs (25K, 50K and 100K available)
- 3″ heavy duty track (where not standard)
- Outside keyed Security Lock
- Double End Stiles
- Design pressure rated (WindCode)
- Impact Rated
- Photo eyes, sensing edges and Operators
- Extended 8-Year Hardware Warranty
- Header (top) and Jamb Seals
- High Performance Hardware Upgrade
CUSTOM OPTIONS:
- Mullions
- Breakaway Sections
- Pass Door
MODEL – 520/524/525
| Panel Design: | 2″ thick roll formed ribbed steel |
| Steel Gauge: | 20 ga (.034″ min) – Model 520, 24 ga (.022″ min) – Model 524and 25 ga (.019 min) – Model 525 ribbed steel sections |
| Joint Design: | Tongue and groove |
| Thickness/Insulation: | No insulation |
| Hardware: | 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs |
| Colors: | Pre-painted white or brown (520/525) Pre-painted white, brown, tan or gray (524) |
| Limited Warranty: | 10-year finish against rust / one-year material & workmanship |
MODEL 520S
| Panel Design: | 2″ thick roll formed stucco embossed ribbed steel |
| Steel Gauge: | 20 gauge (.034″ min) for maximum dent resistance |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover |
| Thermal Conductivity | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white or brown |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
MODEL 524V / 524S
| Panel Design: | 2″ thick roll formed stucco embossed steel |
| Steel Gauge: | 24 gauge (.022″ min) ribbed steel sections |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover (524V) 1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover (524S) |
| Thermal Conductivity | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white, brown, tan or gray |
| Limited Warranty: | 10-year paint /one-year material & workmanship |
MODEL 525V / 525S
| Panel Design: | 2″ thick roll formed smooth steel with combination of deep minor ribs |
| Steel Gauge: | 25 gauge (.019″ min) |
| Joint Design: | Tongue and groove |
| Thickness /Insulation | 1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover (525V) 1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover (525S) |
| Thermal Conductivity: | R-Value 6.6* |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors: | Pre-painted white or brown |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
MODEL – 664
| Panel Design: | 1 7/8″ thick roll formed steel |
| Steel Gauge: | 24 gauge (.22″ min) raised panel door |
| Joint Design: | Tongue and groove |
| Thickness & Insulation | No insulation |
| Hardware: | 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs |
| Colors: | Pre-painted snowmist white, chocolate, brown, almond, sandstone, or desert tan. |
| Limited Warranty: | 10-year finish against rust through / one-year material & workmanship |
MODEL 664V
| Panel Design: | 1-7/8″ thick woodgrain embossed raised panel steel |
| Steel Gauge: | 24 gauge (.022″ min) ribbed steel sections |
| Joint Design: | Tongue-and-groove |
| Thickness /Insulation | 1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover |
| Thermal Conductivity | R-Value 6.3* |
| Paint System | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Colors | Pre-painted white, brown, tan or gray; Trinar white or beige |
| Limited Warranty: | 10-year paint / one-year material & workmanship |
*Calculated garage door section R-value is in accordance with DASMA TDS-163.
COMMERCIAL HARDWARE
Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.
- 14 gauge hinges
- Commercial 10 ball steel rollers with options for nylon tire rollers
- 10,000 cycle torsion springs
- Steel step plate and lift handle for easy operation
- Inside slide lock for increase security
- 19 gauge steel hinge support plates
- 18-gauge single end stiles; 16-gauge double end stiles
- Galvanized aircraft cables with 7:1 safety factory
- 2” or 3” track in a variety of configurations to meet building design requirements
COMMERCIAL TRACK APPLICATIONS
In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.
COMMERCIAL TORSION SPRINGS
Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles.