extreme Series High Performance Door System

Extreme Series

Commercial Garage Doors

high performance door system

CLOPAY® EXTREME™ SERIES HIGH PERFORMANCE SECTIONAL DOOR SYSTEM

The Clopay Extreme™ Series combines high-strength durability with the ability to open at 24” per second. Powered by the robust LiftMaster opener, the Extreme™ Series- commercial doors are a great fit for emergency facilities, distribution center warehouses, car dealerships and much more.

Manufactured with heavy duty hardware, these low maintenance sectional doors boast five times the spring life of an average commercial sectional door for optimal performance.

STANDARD SPECIFICATIONS
Max Width16’2″
Max Height14’0″
Max Door Weight1,000 lbs
Upward Travel24″ per second
Downward Travel15″ per second
StilesDouble end stiles (standard)
Glazing AvailableTempered, insulated tempered, acrylic and polygal
Springs*50,000 cycle standard
(Max cycles available on a single shaft line)
Track Size2″ angle mount track standard
3″ track where applicable
Track TypeStandard lift, high lift and full vertical
WarrantyStandard paint – 5 years
Color Blast® finish – 5 years
Material and workmanship – 1 year
Hardware – 1 year
 
*Cycles can vary depending on door configuration.
HIGH PERFORMANCE DOOR SYSTEM POWERED BY LIFTMASTER
opener2

The Clopay Extreme™ Series High Performance Door System boasts an opening speed of 24″ per second, allowing productivity to flourish while also delivering a flawless aesthetic thanks to optional full-view windows. Tandem nylon rollers improve roller life and reduce running noise for smooth, quiet operation while safety stays top of mind with enhanced features such as 3′ of light curtain protection, a cable management system and standard cable tension monitor.

ALUMINUM FULL-VIEW DOORS
ModelThicknessSpacingR-ValueMax Width✭Max Height✭
EX9042-1/8″Equal width & spacingN/A16’2″14’0″
EX904U2-1/8″Equal width & spacing3.8*16’2″14’0″

✭Maximum Width and Height values listed are Standard sizing.
*With clear insulated glass

INSULATED STEEL FULL-VIEW DOORS
ModelSection ThicknessEmbossExterior Gauge Section Design InsulationR-Value Solid*R-Value w/Glass**Thermal BreakMax Width✭Max Height✭
EX37292″Stucco27Minor RibbedPolyurethane***18.48.0Yes16’2″14’0″
EX37282″Stucco27FlushPolyurethane***18.48.0Yes16’2″14’0″
EX37091-3/8″Stucco27 Minor RibbedPolyurethane***12.95.9Yes16’2″14’0″
EX37081-3/8″Stucco27 FlushPolyurethane***12.95.9Yes16’2″14’0″
EX32092″Stucco24 Minor RibbedPolystyrene9.14.4Yes16’2″14’0″
EX32082″Stucco24 FlushPolystyrene9.14.4Yes16’2″14’0″
EX31591-3/8″Stucco27 Minor RibbedPolystyrene6.53.4Yes16’2″14’0″
EX31581-3/8″Stucco27 FlushPolystyrene6.53.4Yes16’2″14’0″

*  R-values calculated per DASMA TDS-163 on a solid door
** R-values calculated per DASMA TDS-163 using weighted average with 3/4″ insulated glass.
*** Intellicore Icon Clopay’s proprietary polyurethane Intellicore insulation.
✭Maximum Width and Height values listed are Standard sizing.

ENERGY SERIES
ModelSection
Thickness
EmbossExt. Skin
Pattern
Ext. Steel
Gauge
R-Value*Thermal BreakMax WidthMax Height 
EX32202″StuccoFlush20 gauge9.1Thermally broken16’2″14’0″ 
EX32132″WoodgrainRaised panel24 gauge9.1Thermally broken16’2″14’0″ 
EX32112″WoodgrainFlush24 gauge9.1Thermally broken16’2″14’0″ 
EX32002″StuccoMinor Ribbed24 gauge9.1Thermally broken16’2″14’0″ 
EX31501-3/8″StuccoMinor Ribbed27 gauge6.5Thermally broken16’2″14’0″

*Calculated door section R-value is in accordance with DASMA TDS-163

ENERGY SERIES WITH INTELLICORE®
ModelThicknessEmbossExterior SteelPatternIntellicore LogoR-Value*Std Max Width**Std Max Height
EX37232″Woodgrain27 GaugeRaised Panel18.416’2″14’0″
EX37212″Woodgrain27 GaugeFlush18.416’2″14’0″
EX37202″Stucco27 GaugeMinor Ribbed
18.416’2″14’0″
EX37171 3/4″Stucco27 GaugeMinor Ribbed
16.216’2″14’0″
EX37181 3/4″Stucco27 GaugeFlush
16.216’2″14’0″
EX37151 3/8″Stucco27 GaugeMinor Ribbed
Intellicore Icon
12.916’2″14’0″

*Calculated door section R-value is in accordance with DASMA TDS-163
**For sizes over 32’2″ wide consult factory for specific configuration requirements.

OPERATOR SPECIFICATIONS
Motor Design1.25 HP configuration serving single phase
115V/230V and 3-phase 230V configurations
3-phase 460/575V available with accessory transformer
Wall ControllerSeparation of low and high voltage wiring – includes
functionality of 3-button station, PLUS
setting door profile, programming limits, diagnostics
ProgrammingComplete the following programming at floor level:
set limits; choose door profiles for speed;
set operating modes; select photo entrapment devices
DisplayProvides textual status indications including
– Absolute cycle count
– Service cycle count
– Diagnostics messages
– Door/operator status
Cycle CounterRe-settable cycle counter via the wall controller and/or through MyQ facility
Limit SettingsSimple electronic push-button setup via the wall controller

Extreme™ Series section doors are available through Master Authorized Dealers and Authorized Dealers. To find a MAD or AD near you, use our Dealer Locator.

Master Authorized Dealer BadgeAuthorized Dealer Badge

CLEAR GLASS

GRAY TINTED GLASS

BRONZE TINTED GLASS

MIRRORED GLASS*

OBSCURE GLASS

WHITE LAMINATE GLASS*

Black Laminate Glass 

BLACK LAMINATE GLASS*

FROSTED GLASS OR ACRYLIC

CLEAR ACRYLIC

GRAY ACRYLIC

WHITE ACRYLIC

CLEAR POLYCARBONATE

BRONZE POLYCARBONATE

ALUMINUM PANEL COLOR MATCH

Note: Extreme™ Series must have tempered glass

*Mirrored and laminate not available in 1/2″

Glass options above only available on full-view sections. Glass thickness available in 1/8″, 1/4″ and 1/2″. Tri-wall polycarbonate thickness available in 5/8″. Low-E available on insulated glass.

COLOR OPTIONS:

CLEAR ALUMINUM (ANODIZED)

CLEAR ALUMINUM (ANODIZED)

STANDARD WHITE

STANDARD WHITE

BRONZE (PAINTED)

BRONZE (PAINTED)

CHOCOLATE (PAINTED)

CHOCOLATE (PAINTED)

BRONZE (ANODIZED)

BRONZE ANODIZED*

BLACK (ANODIZED)

BLACK (ANODIZED)*

DARK BRONZE (ANODIZED)

DARK BRONZE ANODIZED*
 

*Additional cost and lead time may apply. The use of “Bronze (Painted)” is recommended due to slight color variation that may occur during the anodizing process.
Custom powder coat, Color Blast®, and anodized finishes available.

Premium finishing options include:

  • RAL color powder coat
  • 187 different powder coat offerings
  • Custom Colors with Color Blast ® Garage Door Paint System
  • Bronze, dark bronze, black or custom color anodized finishing

*Model EX904U is not available with powder coat finish.
 
STEEL INSULATED FULL-VIEW DOORS
GLASS/WINDOW OPTIONS:
Classic Plain Short
19-1/2” x 16”
PLAIN LONG
42” x 16”
CONTEMPORARY SLIM WINDOW IN SILVER
Modern Slim Windows*
 

*Available on models EX3728/EX3729 and EX3208/EX3209 only.

Models EX3728 and EX3729 are available with 1/8″ clear tempered, 1/8″ frosted tempered, 3/4″ insulated tempered and 3/4″ frosted insulated tempered glass. Additional glazing options include: matte, pebble, bronze tinted and impact rated window.

 
COLOR OPTIONS:

STANDARD WHITE

STANDARD WHITE

Glacier-White 

GLACIER WHITE

Almond 

ALMOND

Desert-Tan 

DESERT TAN

Sandtone 

SANDTONE

Bronze 

BRONZE

MochaBrown 

MOCHA BROWN

GRAY

GRAY

Charcoal 

CHARCOAL

CHOCOLATE

CHOCOLATE

BLACK

BLACK*

TRINAR® WHITE

TRINAR® WHITE*

Lustra Black*±

Lustra Black*±

Lustra Charcoal*±

Lustra Charcoal*±

Lustra Silver*±

Lustra Silver*±

*Available on select models
± Finish will have smooth texture
Custom powder coat and Color Blast® finishes available.

Premium finishing options include:

  • Custom Colors with Color Blast ® Garage Door Paint System
  • Bronze, dark bronze, black or custom color anodized finishing
SAFETY FEATURES
SAFETY
WINDCODE®
windcode-W 
WindCode® reinforcement available up to W5 design pressure (DP) 36 PSF, depending on door size, configuration and exposure. Doors tested 50% greater than DP
EX904/EX904U
Made of 2-1/8” durable commercial grade aluminum, making it virtually maintenance-free and long-lasting.
 
Model EX904U made of 2-1/8″ durable commercial grade aluminum with polyurethane insulation with an R-value of 3.8 (with clear insulated glass)
 
Tongue-and-groove with integral joint seal for further reduction of air and water infiltration.
 
Smooth flat frame edge design for a more contemporary look.
 
Reinforcing fin included on doors wider than 14’. Doors 12’ and under do not use built-in reinforcing fin. Usage on widths 12’2” to 14’ depend upon glass weight. WINDCODE® doors may vary.
 
EX3200 SERIES

EX3200 Cutaway

HARDWARE FEATURES
SPRINGS
50,000 Cycle Springs

50,000 cycle spring standard

Option available for maximum cycles on a single shaft line

Springs are shot peened to improve resistance to fatigue

DOUBLE END STILES

Double End Stiles

Helps improve hinge longevity

LIFT CABLE WITH THIMBLE
Lift Cable with Thimble

Thimble helps reduce wear and extend cable life

ROLLERS
Tandem Roller

Long stem tandem rollers provide longer roller life and quiet door operation

CABLE SNUBBER
Cable Snubber

Maintains tension on lift cable to prevent it from coming off of the drum

PUSHER SPRINGS
Pusher Spring

Helps prevent cable slack. Provided with standard lift track.

WINDCODE®
windcode-W

WindCode® reinforcement available up to W5 design pressure (DP) 36 PSF, depending on door size, configuration and exposure. Doors tested 50% greater than DP.

Scroll to Top