Architectural Series
aluminum full-view doors and steel insulated full-view doors
The perfect choice for architectural applications that require open visibility, bright light and a modern, industrial design.
Clopay’s full-view series doors are ideal for commercial buildings requiring visibility, access to natural lighting and modern look. They’re the perfect choice for everything from restaurants and fire stations to service stations and car dealerships.
These overhead doors are available with aluminum or steel frame construction, providing options that ensure maximum durability and reliability. Customize your door with a wide variety of window, color, design and performance options.
ALUMINUM FULL-VIEW
| Model | Thickness | Spacing | R-Value | Max Width✭ | Max Height✭ |
| 904 | 2-1/8″ | Equal width & spacing | N/A | 24’2″ | 20’0″ |
| 904U | 2-1/8″ | Equal width & spacing | 3.8* | 20’2″ | 20’0″ |
| 903 | 2-1/8″ | Equal panel spacing | N/A | 24’2″ | 20’0″ |
| 902 | 2-1/8″ | 44″ on center, end panels vary | N/A | 24’2″ | 20’0″ |
✭Maximum Width and Height values listed are Standard sizing.
*With clear insulated glass
INSULATED STEEL FULL-VIEW
| Model | Thickness | Emboss | Exterior Gauge | Pattern | Intellicore | R-Value Solid* | R-Value w/Glass** | Thermal Break | Max Width✭ | Max Height✭ |
| 3729 | 2″ | Stucco | 27 | Minor Ribbed |  | 18.4 | 8.0 | Yes | 20’2″ | 18’0″ |
| 3728 | 2″ | Stucco | 27 | Flush | | 18.4 | 8.0 | Yes | 20’2″ | 18’0″ |
| 3709 | 1-3/8″ | Stucco | 27 | Minor Ribbed | | 12.9 | 5.9 | Yes | 18’2″ | 16’0″ |
| 3708 | 1-3/8″ | Stucco | 27 | Flush | | 12.9 | 5.9 | Yes | 18’2″ | 16’0″ |
| 3209 | 2″ | Stucco | 24 | Minor Ribbed | 9.1 | 4.4 | Yes | 20’2″ | 18’0″ | |
| 3208 | 2″ | Stucco | 24 | Flush Panel | 9.1 | 4.4 | Yes | 20’2″ | 18’0″ | |
| 3159 | 1-3/8″ | Stucco | 27 | Minor ribbed | 6.5 | 3.4 | Yes | 18’2″ | 16’0″ | |
| 3158 | 1-3/8″ | Stucco | 27 | Flush panel | 6.5 | 3.4 | Yes | 18’2″ | 16’0″ |
* R-values calculated per DASMA TDS-163 on a solid door
** R-values calculated per DASMA TDS-163 using weighted average with 3/4″ insulated glass.
✭Maximum Width and Height values listed are Standard sizing.
GLAZING MATERIAL OPTIONS:
*Mirrored and laminate not available in 1/2″
Glass options above only available on full-view sections. Glass thickness available in 1/8″, 1/4″ and 1/2″. Tri-wall polycarbonate thickness available in 1/2″ (Model 902/903 Only) and 5/8″ (Model 904 Only). Low-E available on insulated glass.
COLOR OPTIONS:
*Additional cost and lead time may apply. The use of “Bronze (Painted)” is recommended due to slight color variation that may occur during the anodizing process.
Custom powder coat, Color Blast®, and anodized finishes available.
Premium finishing options include:
- RAL color powder coat
- 187 different powder coat offerings
- Custom Colors with Color Blast ® Garage Door Paint System
- Bronze, dark bronze, black or custom color anodized finishing
PERFORMANCE OPTIONS AVAILABLE:
SPECIALTY OPTIONS AVAILABLE:
STEEL INSULATED FULL-VIEW DOORS
GLASS/WINDOW OPTIONS:
*Available on models 3728/3729 and 3208/3209 only.
Models 3728 and 3729 are available with 1/8″ clear tempered, 1/8″ frosted tempered, 3/4″ insulated tempered and 3/4″ frosted insulated tempered glass. Additional glazing options include: matte, pebble, bronze tinted and impact rated window.
COLOR OPTIONS:
*Available on select models
± Finish will have smooth texture
Custom powder coat and Color Blast® finishes available.
Premium finishing options include:
- Custom Colors with Color Blast ® Garage Door Paint System
- Bronze, dark bronze, black or custom color anodized finishing
PERFORMANCE OPTIONS AVAILABLE:
SPECIALTY OPTIONS AVAILABLE:
ALUMINUM FULL-VIEW DOORS
MODEL 904/904U | |
|---|---|
| Exterior Skin Pattern: | Recessed aluminum panel |
| Exterior Aluminum Gauge: | 6063-T5 Aluminum |
| Rails and Stiles: | Polyurethane Insulated (904U only) |
| Colors: | Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized) |
| Limited Warranty: | 5-Year Finish / 1-Year Material and Workmanship / 1-Year Hardware |
MODEL 903 | |
|---|---|
| Section Design: | Recessed aluminum panel |
| Material: | 6063-T5 Aluminum |
| Limited Warranty: | 5-year finish / 1-year material and workmanship / 1-year hardware |
STEEL INSULATED FULL-VIEW DOORS
All of our Steel Insulated Door models come with the following:
| Joint Design: | Tongue and groove section with continuous foam thermal break prevents cold or heat from passing through the section |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Limited Warranty: | 10-year paint / 10-year delamination / 1 year material and workmanship / 1 year hardware |
MODEL 3728/3729
| Section Design/Emboss: | (3728) 2” thick stucco embossed steel with flush exterior skin pattern (3729) 2” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 27 exterior; 27 interior |
MODEL 3708/3709
| Section Design/Emboss: | (3708) 1 3/8” thick stucco embossed steel with flush exterior skin pattern (3709) 1 3/8” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 27 exterior; 27 interior |
MODEL 3208/3209
| Section Design/Emboss: | (3208) 2” thick stucco embossed steel with flush exterior skin pattern (3209) 2” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 24 exterior; 27 interior |
MODEL 3158/3159
| Section Design/Emboss: | (3158) 1 3/8” thick stucco embossed steel with flush exterior skin pattern (3159) 1 3/8” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 27 exterior: 27 interior |
COMMERCIAL HARDWARE
Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.
- 14 gauge hinges
- Commercial 10 ball steel rollers with options for nylon tire rollers
- 10,000 cycle torsion springs
- Steel step plate and lift handle for easy operation
- Inside slide lock for increase security
- 19 gauge steel hinge support plates
- 18-gauge single end stiles; 16-gauge double end stiles
- Galvanized aircraft cables with 7:1 safety factory
- 2” or 3” track in a variety of configurations to meet building design requirements
COMMERCIAL TRACK APPLICATIONS
In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.
COMMERCIAL TORSION SPRINGS
Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles.
ALUMINUM FULL-VIEW
| Model | Thickness | Spacing | R-Value | Max Width✭ | Max Height✭ |
| 904 | 2-1/8″ | Equal width & spacing | N/A | 24’2″ | 20’0″ |
| 904U | 2-1/8″ | Equal width & spacing | 3.8* | 20’2″ | 20’0″ |
| 903 | 2-1/8″ | Equal panel spacing | N/A | 24’2″ | 20’0″ |
| 902 | 2-1/8″ | 44″ on center, end panels vary | N/A | 24’2″ | 20’0″ |
✭Maximum Width and Height values listed are Standard sizing.
*With clear insulated glass
✭Maximum Width and Height values listed are Standard sizing.
INSULATED STEEL FULL-VIEW
| Model | Thickness | Emboss | Exterior Gauge | Pattern | Intellicore | R-Value Solid* | R-Value w/Glass** | Thermal Break | Max Width✭ | Max Height✭ |
| 3729 | 2″ | Stucco | 27 | Minor Ribbed | | 18.4 | 8.0 | Yes | 20’2″ | 18’0″ |
| 3728 | 2″ | Stucco | 27 | Flush | | 18.4 | 8.0 | Yes | 20’2″ | 18’0″ |
| 3709 | 1-3/8″ | Stucco | 27 | Minor Ribbed | | 12.9 | 5.9 | Yes | 18’2″ | 16’0″ |
| 3708 | 1-3/8″ | Stucco | 27 | Flush | | 12.9 | 5.9 | Yes | 18’2″ | 16’0″ |
| 3209 | 2″ | Stucco | 24 | Minor Ribbed | 9.1 | 4.4 | Yes | 20’2″ | 18’0″ | |
| 3208 | 2″ | Stucco | 24 | Flush Panel | 9.1 | 4.4 | Yes | 20’2″ | 18’0″ | |
| 3159 | 1-3/8″ | Stucco | 27 | Minor ribbed | 6.5 | 3.4 | Yes | 18’2″ | 16’0″ | |
| 3158 | 1-3/8″ | Stucco | 27 | Flush panel | 6.5 | 3.4 | Yes | 18’2″ | 16’0″ |
* R-values calculated per DASMA TDS-163 on a solid door
** R-values calculated per DASMA TDS-163 using weighted average with 3/4″ insulated glass.
✭Maximum Width and Height values listed are Standard sizing.
STEEL INSULATED FULL-VIEW DOORS
GLASS/WINDOW OPTIONS:
 19-1/2” x 16” |  42” x 16” |  Modern Slim Windows* |
*Available on models 3728/3729 and 3208/3209 only.
Models 3728 and 3729 are available with 1/8″ clear tempered, 1/8″ frosted tempered, 3/4″ insulated tempered and 3/4″ frosted insulated tempered glass. Additional glazing options include: matte, pebble, bronze tinted and impact rated window.
COLOR OPTIONS:
STANDARD WHITE
41b0f13537a5432fac7f1b0bb02c62d9.png "CHOCOLATE")
± Finish will have smooth texture
Custom powder coat and Color Blast® finishes available.
Premium finishing options include:
- Custom Colors with Color Blast ® Garage Door Paint System
- Bronze, dark bronze, black or custom color anodized finishing
PERFORMANCE OPTIONS AVAILABLE:
SPECIALTY OPTIONS AVAILABLE:
MULLIONS
SAFE-T-STOP™ CHAIN HOIST
ALUMINUM FULL-VIEW DOORS
MODEL 904/904U | |
|---|---|
| Exterior Skin Pattern: | Recessed aluminum panel |
| Exterior Aluminum Gauge: | 6063-T5 Aluminum |
| Rails and Stiles: | Polyurethane Insulated (904U only) |
| Colors: | Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized) |
| Limited Warranty: | 5-Year Finish / 1-Year Material and Workmanship / 1-Year Hardware |
MODEL 903 | |
|---|---|
| Section Design: | Recessed aluminum panel |
| Material: | 6063-T5 Aluminum |
| Limited Warranty: | 5-year finish / 1-year material and workmanship / 1-year hardware |
STEEL INSULATED FULL-VIEW DOORS
All of our Steel Insulated Door models come with the following:
| Joint Design: | Tongue and groove section with continuous foam thermal break prevents cold or heat from passing through the section |
| Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
| Limited Warranty: | 10-year paint / 10-year delamination / 1 year material and workmanship / 1 year hardware |
MODEL 3728/3729
| Section Design/Emboss: | (3728) 2” thick stucco embossed steel with flush exterior skin pattern (3729) 2” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 27 exterior; 27 interior |
MODEL 3708/3709
| Section Design/Emboss: | (3708) 1 3/8” thick stucco embossed steel with flush exterior skin pattern (3709) 1 3/8” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 27 exterior; 27 interior |
MODEL 3208/3209
| Section Design/Emboss: | (3208) 2” thick stucco embossed steel with flush exterior skin pattern (3209) 2” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 24 exterior; 27 interior |
MODEL 3158/3159
| Section Design/Emboss: | (3158) 1 3/8” thick stucco embossed steel with flush exterior skin pattern (3159) 1 3/8” thick stucco embossed steel with minor ribbed exterior skin pattern |
| Steel Gauge: | 27 exterior: 27 interior |
COMMERCIAL HARDWARE
Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.
- 14 gauge hinges
- Commercial 10 ball steel rollers with options for nylon tire rollers
- 10,000 cycle torsion springs
- Steel step plate and lift handle for easy operation
- Inside slide lock for increase security
- 19 gauge steel hinge support plates
- 18-gauge single end stiles; 16-gauge double end stiles
- Galvanized aircraft cables with 7:1 safety factory
- 2” or 3” track in a variety of configurations to meet building design requirements
COMMERCIAL TRACK APPLICATIONS
In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.
COMMERCIAL TORSION SPRINGS
Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles.